Bluetooth Mode#
Note
Only suitable for RF+BT scanners with Bluetooth function.
Read Interface Settings#
Current Interface Settings#
Bluetooth Transmission Mode#
Note
The blue light is always on or flashing to indicate that it is currently in Bluetooth mode; the blue light is off to indicate that it is currently in 2.4G mode or USB wired mode.
Bluetooth Transmission#
Bluetooth Operating Mode#
Note
Valid only in Bluetooth mode.
Note
Before switching the Bluetooth working mode, you need to clear the pairing information between the host device and the scanner.
Bluetooth HID Keyboard (Default)#
Bluetooth SPP Serial Port#
Bluetooth BLE Serial Port#
Bluetooth cradle transmission mode#
Note
It is suitable for pairing with a Bluetooth cradle that has already been paired. When the barcode on the base is damaged, you can also use the gadget BluetoothAddress.exe to generate a pairing barcode.
Change Bluetooth Name#
After entering the new Bluetooth name, scan the generated QR code to complete the setup. If the host has saved old pairing records after modification, please delete the old pairing first and search for connection again.
Clear Bluetooth HID Pairing#
After scanning “Clear Pairing” in Bluetooth transmission mode, the scanner will disconnect the currently paired device and clear the pairing list, then wait for new devices to be paired. Historically paired devices need to be deleted and paired again.
Clear Bluetooth Pairing#
System Keyboard Functions#
iOS system pop-up keyboard function#
iOS pop up/hide keyboard#
Press and hold the trigger for 4 seconds to toggle the iOS on-screen keyboard#
Double-press the trigger to toggle the iOS on-screen keyboard#
Pop up iOS keyboard switch after sending#
Windows Caps Lock detection#
Note
This command is only available on some Bluetooth scanners. After scanning the setup code, two short beeps indicate disabled, and one three-tone beep indicates enabled.
Windows Caps Lock detection switch#
Switch between Bluetooth and 2.4G by pressing and holding for 8 seconds#
Note
This command is only available on some RF+BT scanners (DS, C, RT). When enabled, press and hold the trigger for more than 8 seconds and release it to switch between RF and BT. If you hold it for more than 16 seconds, the scanner powers off and the mode does not switch. After scanning the setup code, two short beeps indicate disabled, and one three-tone beep indicates enabled.
Press and hold the trigger for 8 seconds to toggle RF/BT switching#
Bluetooth keyboard transmission speed#
Note
Valid only in Bluetooth mode.
Read Bluetooth HID delay#
High speed (2 ms)#
High speed (6 ms)#
* Medium speed (10 ms)#
Medium speed (18 ms)#
Low speed (25 ms)#
Low speed (30 ms)#
Bluetooth connection status non-sleep setting#
Note
After scanning the setup code, two short beeps indicate disabled, and one three-tone beep indicates enabled.
Bluetooth connection status non-sleep switch#